Control
Password protection
29
Subject to technical changes.
Stepper motor-driven diaphragm dosing pump NXP-M and NXP-P
Operating instructions
Entering the password
Once you press any key, you must enter the password. If you enter the
code correctly, you have 120 seconds in which to operate the dosing
pump. The password must be re-entered after the end of the 120
seconds, even if this runs out during entry.
4 3 2 1
OK - +
Fig. 27: Entering the password
1.
Use the
+
and
-
keys to set a value from 0 to 9 for the first digit of the
code and then press
.
2.
Proceed as described under point 1 for the other digits.
3.
After entering all the digits, press
OK
.
4
If your input is correct, the dosing pump displays the start screen.
i
If you have forgotten the code, please contact Neptune.
10.3.1.1 Deactivating the password protection
1.
Press
-
and
+
simultaneously.
2.
Press
until is selected.
3.
Press
-
.
4.
Press
OK
.
ü
Password protection deactivated.