Neptune NPVS150 – Basic Operation Guide Page 5
6.09
Short press
until digits flash.
6.10
Press
to scroll right and
to scroll left between digits.
6.11
Press
or
to change time.
6.12
Short press
to save setting.
6.13
Press
to scroll through menu until 1 E: is displayed for Speed 1 or 2 E: for Speed 2. “
This setting is used to enable or disable to timer.
6.14
Short press
until digits flash.
6.15
Press
or
to enable timer (on) or disable timer (off)
6.16
Short press
to save setting.
6.17
Press
and hold down for 3 seconds, this will now exit the controller settings.
7.
PRIMING SETTINGS
7.01
Short press
until screen displays S1:, S2:, S3: or P: (You cannot enter controller settings
whilst CL: Clock is displayed)
7.02
Press
and hold down for 3 seconds, this will now enter the controller settings.
7.03
Press
to scroll through menu until PL: is displayed, this setting is for the priming time.
7.04
Short press
until digits flash.
7.05
Press
to scroll right and
to scroll left between digits.
7.06
Press
or
to change priming time, maximum priming time is 20 minutes,
minimum is 1 minute.
7.07
Short press
to save setting.
7.08
Press
to scroll through menu until PS: is displayed, this setting is for the priming speed
in RPM.
7.09
Short press
until digits flash.
7.10
Press
to scroll right and
to scroll left between digits.
7.11
Short press
or
to increase or decrease the speed setting by 10 RPM. (minimum priming
speed is 2900 RPM) Long Press to increase / decrease rapidly. (This will not alter the saved settings)
