Neptune NPVS150 – Basic Operation Guide Page 3
1.
STARTING THE PUMP
1.01
Press
. The Power light
will illuminate.
1.02
The pump will start after controller goes through its diagnostics.
1.03
If priming function has been enabled, the pump will start on prime for the desired
timeframe set.
1.04
External and/or internal timers can now be used.
2.
SETTING THE CLOCK
2.01
Whilst in display mode, short press
to cycle between displays until CL: (CLOCK) is
displayed.
2.02
Press
and hold down for 3 seconds until digits flash.
2.03
Press
to scroll right and
to scroll left between digits.
2.04
Press
or
to change time.
2.05
Short press
to save setting.
3.
SELECTING SPEED
3.01
Press
or
or
. Light will illuminate above selected speed, this will now be
the default speed.
4.
DEFAULT SPEEDS
4.01
Default Speed 1500 RPM -This speed should be used for economy mode on filtration.
4.02
Default Speed 2400 RPM - This speed should be used for a majority of suction cleaners
connected to skimmer box.
4.03
Default Speed 3400 RPM - This speed should be used for backwashing sand filters and
manual vacuuming.
