HOW TO……..
Set for Doorbell operation
Press and Hold * for 2-
3 Sec’s until Red LED Flashes
<Enter>Admin Password #
4.1.18 Set alarm or doorbell output function
•
42 1 # - alarm wire output doorbell signal voltage <Grey Wire>
Note: The Alarm wire is internally connected with the drain of the NMOS cct, and the output is active
low, which can drive the
current below < 1Amp
4.1.26 Set the # key whether it can be used doorbell key
•
56 1 # - the # key can be used as doorbell key
Note: When the # key is used as doorbell key, if the # key is the first key, then it is doorbell function. If
the # key is after the digital key, then it is confirm function.
4.1.27 Set doorbell key mode
•
57 1# - the doorbell key is valid, but without volume.
•
57 2# -
the doorbell key is valid, with “ding
-
dong” tone
-
Exit Menu’s
Doorbell Wiring
Doorbell
NEPTUNE
Quick Reference Guide
