Practical Multi-Purpose Utility Pump – User Guide
Page 6
The plug is keyed and will only fit in the DC24 port one way. The plug has a locking tab;
this tab must point in the same direction as the face of the EB832 or 1LINK module. Insert
the plug as shown:
To remove the plug from the DC24 port, press down on the back of the locking tab, then
pull it out.
CONTROLLING THE PMUP
The PMUP is controlled by the programming of the EB832 or 1LINK output to which it is
connected. The tiles for these outputs appear in APEX Fusion like this:
