Neptun Classic NCTP-O 300i, Руководство по эксплуатации

Страница: 12 / 96

- GB -
- GB -
12
Remedy of faults
Malfunction Cause Remedy
The unit does not start up No mains voltage Check the mains voltage
Impeller unit blocked Clean
Insufficient fountain height Regulator closed too far Adjust regulator
Pump casing or impeller unit soiled, hose
blocked Clean
Hose defective Replace
Hose kinked Route hose in a straight line
Impeller unit worn Replace impeller unit
Maintenance and cleaning
WARNING
Possible death or severe injury from hazardous electrical voltage!

Prior to reaching into the water, isolate (switch off and disconnect) all units/devices used in the water.

Isolate the device (disconnect from the power supply) before carrying out any work on it.
If necessary, clean the unit with clear water using a soft brush.

Do not use aggressive cleaning agents or chemical solutions as they could attack the housing or impair the function
of the unit.

Recommended cleaning agent for removing stubborn limescale deposits:
– Vinegar- and chlorine-free household cleaning agent.

After cleaning, thoroughly rinse all parts in clean water.
Replacing the impeller unit
How to proceed:

D
1. Pull off the pump casing.
2. Pull the impeller unit out of the motor housing.
3. Assemble the pump in the reverse order.
Storage
The unit is not frost-proof and has to be removed and put into storage if minus temperatures are expected.
How to correctly store the unit:

Thoroughly clean the unit, check it for damage and replace any damaged parts.

Store the pump submerged and in a frost-free environment.

Protect open plug connections from moisture and dirt.
Wear parts

Impeller unit
Disposal
Do not dispose of this unit with domestic waste! For disposal purposes, please use the return system provided. Render
the unit unusable beforehand by cutting the cables.