Neptronic EVCB14NIT4X/TRL24 Series, Спецификация и инструкции по установке

Страница: 7 / 20

Networkable VAV Controller
Specification and Installation Instructions
www.neptronic.com EVCB14NIT4X Page | 7
Inputs
– Menu (2 of 7) |
AI1, AI2, DI1 and DI2
OPt
(Options)
DI2
mor
(Motor position)
mor
(Motor position)
ASt
(Air supply temp sensor)
CO2
(carbon dioxide)
StFl
(setpnt airflow 0-10Vdc)
AI1 Signal Type
EtS
(external temp sensor)
OFF
(disabled)
DI1
AI2
Config Input
AI1
NoHt
(normally heat)
NoCl
(normally cool)
SENs
(sensor)
CH Over Setpnt
24
°
C
= scroll menu items
= select / set value
= select / set value
nSbc
(night set back closed)
nSbo
(night set back open)
OCCc
(occupancy closed)
OCCo
(occupancy open)
NSB-OCC Contact
OFF
Go to “DI2"
NSB Overide delay Min
120 min
(0-180)
No OCC Overide Delay Min
120 min
(0-180)
Off
NSB Mode
StP
(setpoint)
No OCC Heating setpnt
16°C / 61°F
No OCC Cooling setpnt
28°C / 82°F
Go to “DI2"
NSB Heating setpnt
16°C / 61°F
NSB Cooling setpnt
28°C / 82°F
Go to
“OutP"
DI2 Signal Type
NC
(normally closed)
OVH2
(override heat 2)
OVH1
(override heat 1)
Ovrd
(override all)
NoCl
(normally cool)
OFF
NoHt
(normally heat)
OVHt
(override all heat)
= select / set value
DI2 Delay Seconds
120
(0-3600)
DI2 Contact
NO
(normally open)
Go to “OutP"
Go to “OutP"
AI1
DI1
DI2
Main Menu Sub Menu Configuration
= scroll menu items
CO2 Maximum Range
2000 ppm
CO2 Setpnt
800 ppm
Go to “AI2"
Go to “AI2"
Go to “AI2"
ASt
(Air supply temp sensor)
CO2
(carbon dioxide)
StFl*
(setpnt airflow 0-10Vdc)
AI2 Signal Type
EtS
(external temp sensor)
OFF
(disabled)
NoHt
(normally heat)
NoCl
(normally cool)
SENs
(sensor)
CH Over Setpnt
24 ° C
= select / set value
AI2
CO2 Maximum Range
2000 ppm
CO2 Setpnt
800 ppm
Go to “DI1"
Go to “DI1"
Go to “DI1"
OPEn
NSB Motor Mode
Auto
Go to “DI1"
Go to “OutP"
MSV.1
AV.58
AV.140 AV.141
AV.58
AV.140
AV.61
AV.60
MSV.2
MSV.10
MSV.14
AV.141
AV.19
BV.20
AV.18
AV.19 AV.18
MSV.36
AV.64
BV.36
*** You must press the button to save any changes ***
*** Pressing the button returns to the previous step without saving ***
Main Menu
APPS
(Applications)
PrSs
(Pressure)
rMp
(Ramps)
NET
(Network)
HrS
(Time & Date)
Setc
(Settings)
Mot
(Motor)
tMp
(Temperature)
OutP
(Outputs)
InPt
(Inputs)
Appears only if using TRL or TRLH
For TRLG and TRLGH go to “Opt” menu.
Go to “AI2"
YES
CO2 DISPLAY
NO
BV.65
To display CO2 without generating
an alarm, use a setpoint higher than
2000ppm or the CO2 Maximum
Range (highest of the 2).
When set to YES, the unit will not display
the time when in Operation Mode
Appears only if using TRL or TRLH
For TRLG and TRLGH go to “Opt” menu.
Go to “DI1"
YES
CO2 DISPLAY
NO
BV.65
When set to YES, the unit will not display
the time when in Operation Mode
To display CO2 without generating
an alarm, use a setpoint higher than
2000ppm or the CO2 Maximum
Range (highest of the 2).