Actuator
Specification & Installation instructions
BT00/080619
1
BT100 BT105 BT120 BT200 BT205 BT220
Technical Data
BBTHV1100A BBTHV1105A BBTHV1121A BBTHV1200A BBTHV1205A BBTHV1221A
Auxiliary switches
No
No Yes
(2) No
No Yes
(2)
Feedback
No Yes No No Yes No
Power supply
110 to 130 VAC 50/60Hz
220 to 250 VAC 50/60Hz
Power consumption
4 Watts at 120 VAC (0.166A AC)
7 Watts at 240 VAC (0.166A AC)
Control signal
3 wire / 2 position, 3 wire / 3 point floating
Running time through
90º
20 to 30 sec Torque dependant
Torque
50 in.lb. [5,6 Nm] at rated voltage
Electrical connection
18 AWG [0.8 mm
2
] minimum
Inlet bushing
2 inlet bushing of 5/8 in [15.9 mm] & 7/8 in [22.2 mm]
Angle of rotation
0 to 90 degrees, mechanically adjustable (factory set with 90º stroke)
Direction of rotation
Reversible, Clockwise (CW) or Counterclockwise (CCW) (factory set with CW direction)
Ambient temperature
-22ºF to +122ºF [-30ºC to +50ºC]
Storage temperature
-22ºF to +122ºF [-30ºC to +50ºC]
Relative Humidity
5 to 95 % non condensing.
Weight
3 lbs. [1.4 kg]
Ingress protection
IP22 equivalent to Nema type 2,
IP54 equivalent to Nema type 3R if water tight inlet bushings (not supplied NEP617) are installed
Warning: Do not press the clutch when actuator is powered
Dimensions
A
B
C
D
Dimension Inches Metric
(mm)
A
1.50 38.1
B
3.26 82.8
C
6.60 167.5
D
3.01 76.4
Caution
We strongly recommend that all neptronic products be wired to a separate transformer and that transformer shall service only neptronic products. This precaution will
prevent interference with, and/or possible damage to incompatible equipment.
When multiple actuators are wired on a single transformer, polarity must be observed. Long wiring runs create voltage drop which may affect the actuator performance.
Old Number
BBTHV1100A
BT100
BBTHV1105A
BT105
BBTHV1121A
BT120
BBTHV1200A
BT200
BBTHV1205A
BT205
BBTHV1221A
BT220
Feature:
•
Mounts easy on round
& square shaft (with option –8).
•
Power supply high voltage 120 or 240 VAC.
•
External clutch for manual adjustments.
•
Maintenance
free.
•
Position
indicator.
•
Feedback
(on model 105 & 205).
•
Auxiliary switches
(on model 120 & 220).
