H
EAL
THC
ARE
Questions or issues?
Let us help!
Call:
(201) 343-5202, Ext. 1
Installation Guide
Part #:
70-0285
(See DSU-H Instructions for Use)
Questions or issues?
Let us help!
Call:
(201) 343-5202, Ext. 1
DSU-H In-Line (continued)
AVOID contact between the filter and cleaning or sanitizing agents.
DO NOT remove blister pack from filter until indicated to protect from
contamination.
7
8
MARK the hole locations of the C-Clips on the
wall.
DO NOT REMOVE the blister pack from the
filter. Tear open the pack ends to expose
connectors as shown in Diagram 1.
CONNECT the filter inlet to the quick connector
of the water valve so the filter flow direction
symbol is pointing away from the water valve.
POINT the filter slightly up so that the water will
flow out in an arc motion.
PLACE a bucket under the outlet side of filter to
catch the water.
TURN ON the water valve.
ALLOW the filter to prime until an even amount
of water flows out of the filter (approximately 3-5
minutes)
TURN OFF the water valve.
DSU Installation Template
ATTACH the DSU Template (provided in
installation kit) vertically against the wall in a
desired position to ensure that both flex lines are
not stretched.
MACHINE
SCREW
SCREW
9
MOUNT the C-Clips with 2 screws (1 each).
MACHINE
MACHINE
SCREW
SCREW
CONNECT
FLOW
BUCKET
10
CONNECT
FLOW
BUCKET
Diagram 1
