G6
Hardware User Guide
Copyright © Neoway Technology Co., Ltd
9
If you use an IO system other than 3.3 V, it is recommended to add a triode to separate it. Refer to the
following designs. To reset the module through high level, refer to Figure 3-2.
Figure 3-1 Reset controlled by button
GNSS
Module
nRESET
S
1 k
Ω
R1
TVS
Figure 3-2 Reset circuit with triode separating
GNSS Module
nRESET
4.7kΩ
47k
Ω
R2
R3
Figure 3-3 shows the reset timing of G6.
Figure 3-3 Reset timing of G6
VCC
nRESET
Inactive
Active
UART
1ms
