NeOvo Condens EFU C 40, Руководство пользователя

Страница: 30 / 44

4. Select the required parameter by pressing the or keys to scroll
through the list of adjustable parameters.
5. Confirm the selection by pressing the key.
6. Modify the value of the parameter using the or keys.
7. Confirm the new value of the parameter by pressing the
key.
8. Go back to the main display by pressing the key.
For more information, see
Browsing in the menus, page 19
Selecting a PCB, page 20
8.2.2 Setting the heating
Caution
Altering the factory settings may impair operation of the appliance.
Note
The heating mode can be managed using the TIME PROG menu.
1. Access the heating parameters by pressing the key .
Note
If no outside temperature sensor is connected, this menu can be
used to set the temperature of the heating water.
If an outside temperature sensor is connected, this menu can be
used to set the indoor temperature set point.
2. Select the desired circuit, if there are several PCBs, by pressing the
or key.
3. Confirm the selection by pressing the key.
The status of the heating and the associated heating water tem­
perature set point are displayed alternately.
4. Select the mode to be modified by pressing the or key:
ON mode = comfort
ECO mode = reduction
5. Modify the heating water temperature set point for the selected
mode by pressing the or key.
Note
Press the
key to cancel all input.
6. Confirm the new temperature set point by pressing the key.
7. Go back to the main display by pressing the key.
For more information, see
Setting the timer programming, page 31
8.2.3 Setting the domestic hot water temperature
Note
Domestic hot water production can be managed via the TIME
PROG sub-menu dedicated to timer programming.
1. Access the domestic hot water production parameters by pressing
the key .
2. Modify the domestic hot water set point by pressing the or key.
Note
Press the
key to cancel all input.
3. Confirm the new temperature set point by pressing the key.
Go back to the main display by pressing the key.
Fig.39
MW
-5000040-6
Fig.40
MW-5000144-3
Fig.41
MW-3000249-4
Fig.42
MW-6000254-2
8 Control panel settings IniControl 2
30 EFU C 7642056 - v05 - 30012017