PCIe-USB381F
3 PCIe-USB Card Installation
Once you have set up your PCIe-USB card, current output for each port or if you are installing
multiple PCIe-USB cards, setting up the board ID, then you are ready to install the PCIe-USB card
into the system. To install the PCIe-USB card, please refer to the following procedure.
3.1
Hardware Installation
1.
Save and close all work in progress.
2.
Power off and unplug the power cable from the system you wish to install to.
3.
Open the chassis (side panel) of the computer you wish to install the PCIe-USB card into.
4.
Locate a x4 PCIe or spare x16 PCIe slot, remove the corresponding connector panel and
gently lower the gold finger of PCIe-USB381F into the PCIe slot.
Lower PCIe-USB381F into the case
Insert gold finger into PCIe slot