Nuvo-3000 Series User’s Manual
Copyright © 2013 Neousys Technology Inc. All Right Reserved.
Page 56 of
101
3.2 Install a 2.5” HDD/SSD
Internal SATA#1 port on Nuvo-3000 is used in conjunction with the HDD bracket on
“Pet-Door” to accommodate a 2.5” HDD/SSD. You can install/replace the HDD/SSD
attached to SATA#1 port by following the steps listed below.
1. Follow step#1 in section 3.1 to open the “Pet-Door”. You can see a SATA cable
exposed. You can follow the same instruction to open the “Pet-Door” of Nuvo-3000TB.
2. Find the HDD bracket come with the “Pet-Door”, M3 flat-head screws (4 pieces), and a
HDD thermal pad in the accessory box. Remove the films on both sides of the thermal
pad and place it on the center of HDD bracket.
3. Place the HDD into the bracket and gently push it down to make it contact with the
thermal pad. Use a Philips screwdriver to fix the HDD with M3 flat-head screws. Please
note that the HDD must be placed in the right direction as below.
(another 2 screws are on the opposite side)
