Neostar NR-D21IR, Руководство пользователя

Страница: 13 / 15

HD-SDI CAMERA MANUAL NRHD-D331IR / NRHD-2101IR / NRHD-D21IR
www.balter.de
7. ProduCt InstallatIon
7.1 Note
1. Make sure the unit is powered off before installation.
2. Check power supply voltage consistent with the electric voltage to prevent
voltage unworthy, resulting in damage to the device.
3. Do not use in the environment beyond the boundaries of the temperature, and
maintain good ventilation to prevent the rain in order to reduce the risk of fire or
electric shock.
4. The installation and maintenance of this product should be professional, please
do not in any way to remove or modify the equipment; can only use the required
accessories of manufacturers. Problems caused by unauthorized repair are at
your own risk.
7.2 Installation Tools and Information
Prepare the required engineering data and instructions. Before installation please
prepare the following tools and instrumentation:
A straight or a Phillips-head screwdriver, multi-meter, scissors, needle nose
pliers, tape measure, pencil and so on.
7.3 Installation Method
1. Check the equipment whether it is damaged.
2. Mounting bracket or base.
▪
If the cement wall, install the expansion screws (expansion screw holes need
stand or base hole), and then mount bracket or base.
▪ If the wooden wall, use self-tapping screws to mount.
3. Mounting the camera
a. Dome Camera
Adjust the lens position and make it aim at the monitoring points and present
a clear picture, manually fix lens location and adjust the hemisphere cover. Re-
examine the screen whether the character meets the requirement. Tighten the
hemisphere cover.
b. Box Camera
Adjust the body so that the lens aims at the monitoring points and presents a
clear picture. Tighten the screws, to ensure that it does not move.
Installation method above is for reference only, the specific installation, please
be kind.
Note: The wall needs to bear at least 3X weight of bracket (base) and camera.
12