Neopost PF-75, Руководство пользователя

Страница: 14 / 16

OPERATOR MAINTENANCE
1. It is recommended to let forms cool for one-half hour, from the laser printer, before folding. This allows toner to set on the forms
and static electricity to discharge.
2. Clean in-feed tires and fold rollers with Neopost recommended roller cleaner & rejuvenator to remove paper dust and toner. A
damp cloth with water is the best alternative.
CAUTION: Do not use any chemicals other than the roller cleaner & rejuvenator or water.
10
Fig. 17
Fold Rollers
1. Make sure machine is turned off and unplugged. All folders have
four (4) rubber rollers (Fig. 17).
2. Remove the upper and lower fold plates .
3. Using Formax roller cleaner, spray a new cotton cloth until the
cloth is saturated. Wipe the wet cloth in a back and forth motion
making sure to clean the entire surface of the fold and seal
rollers. Now take a dry cloth and wipe off excess toner. The cloth
should be covered with black toner surplus from cleaning the
rollers.
4. Make sure to run 10-15 sheets of blank copy paper to ensure all
cleaner has been removed from the fold rollers. Running blank
sheets will remove any excess residue of cleaner on the rollers.
CLEANING PROCEDUERS: