Page - 7
AS850 Operating Instructions
Stop button:
Allows documents currently passing through machine
to continue to output, then halts operating cycle.
Start button:
Starts machine into continuous running, and also can-
cels any errors which may be indicated after the cause of the problem
has been cleared by the operator.
Speed decrease button:
Decreases speed in steps down to 0,
shown on speed indicator display.
Speed increase button:
Increases speed in steps up to 9, shown on
speed indicator display.
Speed indicator:
Indicates speed in steps from 0 to 9 (max.)
Setup button:
Feeds through a single document in order to calibrate
document length and weight. This is for double document detection.
Document is diverted before sealing to enable fold lengths to be
checked.
Hand feed button:
Allows single document to be fed through pres-
sure rollers. Note: document must be pre-folded by hand, and placed
in folder bypass chute.
Jog reverse button:
"Jogs" document back through machine in
small steps. Used for clearing jams. Note: after operating, there is a 2
second pause before button can be operated again.
Jog forward button:
"Jogs" document forward through machine in
small steps. Used for clearing jams. Note: after operating, there is a 2
second pause before button can be operated again.
Zero reset (in-count) button:
Zeroes counter display for documents
fed in (machine must be stopped). Note: count will maintain until zero
reset is pressed, even when machine is stopped or switched off.
Zero reset (out-count) button:
Zeroes counter display for docu-
ments fed out (machine must be stopped). Note: count will maintain
until zero reset is pressed, even when machine is stopped or switched
off.
Display panels:
Displays in or out count, and also error messages.
1.5 BUTTON EXPLANATION
I
SSUE
3
F
EB
2008
