Neon HFX-50, Инструкция по эксплуатации

Страница: 15 / 26

- 14 -
Listening to Radio Broadcasts
Caution: Before listening to the radio, please check that the FM Antenna is correctly connected
and adjusted for length and direction.
Tuning in to a Station
1. Repeatedly press the
SOURCE
button on the unit or directly press the button on the
remote control to select tuner source.
- The word “TUNER” will be displayed on the LCD.
2. Select a station using one of the following methods.

Auto Tuning
Long pressing the
L
/
BF
button on the unit or
D
/
C
button on the remote control for
2 seconds or more, the frequency changes down or up automatically until a station is found.

Manual Tuning
Repeatedly press the
L
/
BF
button on the unit or
D
/
C
button on the remote control
to change the frequency until you find the station you want.

Preset Tuning (Available only after the stations are preset)
- Repeatedly press the
G
/
H
buttons on the unit or / buttons on the remote
control to select the desired preset number. Its band and frequency are displayed on the
LCD.
- Directly press the
0-9
buttons on the remote control to input a number directly and tune
to the band and frequency with this number.
Program radio stations
You can program a maximum of 20 preset radio stations (FM).

Automatically
Long pressing the
PROG
button on the remote control for 2 seconds or more to activate au-
tomatic program mode.
- [AUTO] is displayed.
- All available stations are programmed.
- The first programmed radio station is broadcast automatically.

Manually
1. Tune to a radio station.
2. Press the
PROG
button on the remote control to activate program mode.
- The preset number will blink.
3. Press the
G
/
H
buttons on the unit or 0-9 , / buttons on the remote control to
allocate a number to this radio station.
Note: If you select more than 20, the preset number will be changed to “1” automatically.
4. Press the
PROG
button on the remote control again to store the station.
5. Repeat above steps 1 to 4 for each station you want to store in memory with a preset number.
Note:
If the system is unplugged or if a power failure occurs, the preset stations will not be
erased.