Neon HFX-50, Инструкция по эксплуатации

Страница: 13 / 26

- 12 -
ECO Power/Standby Features
Switching ON / OFF
When you first connect the unit to the DC Jack, the unit will be in standby mode.
• Press the button to switch the unit on. The “HELLO” will show in the display.
• Press the button to switch the unit back to standby mode. The “BYE BYE” will scroll across
the display.
Switching the system to ECO Power/Standby mode
Long pressing the button for 2 seconds or more to switch to ECO Power Standby or normal
standby.
* ECO Power standby mode
The clock will not be displayed.Red led on.Press the CLOCK button to display the clcok on
the LCD.
* Normal standby mode
The clock display on the LCD. Red led off.
Power-saving automatic standby
As a power-saving feature, the unit will automatically switch to Standby mode if you do not press
any buttons within 15 minutes after playback is stopped.
Setting the Clock
Setting the Clock Manually
Caution: You can set the clock in standby mode only.
1. In standby mode, long pressing the CLOCK button on the remote control for 2 seconds or
more, the LCD will display CLOCK SET and CLOCK 24 begins to blink.
2. Use the
VOLUME
knob,
H
,
G
buttons on the unit or
VOL+
,
VOL-
,
,
buttons on the
remote contorl to set the 12/24 hour format.
3. Press the
CLOCK
button to store the setting, hour indicator will blink.
4. Repeat above steps 2-3 to set the hour and minute.
Note:
• To exit clock setting mode without storing, press the
L
button.
• If no button is pressed in 90 seconds, the unit exits clock setting mode automatically.
• If a power failure occurs or the unit is disconnected from the mains, the clock setting will be
lost.
Display the Clock
In any source mode, the built-in clock shows the time on the LCD by press the
CLOCK
button.