3
Settings
Factory settings
Two On/Off periods settings
Period 1
Start at 06:30
am
End at 08:30
am
Period 2
Start at 05:00
pm
End at 10:00
pm
Three On/Off periods settings
Period 1
Start at 06:30
am
End at 08:30
am
Period 2
Start at 12:00
pm
End at 02:00
pm
Period 3
Start at 05:00
pm
End at 10:00
pm
4-
The preset day appears.
Press to increment the day.
Press to decrement the day.
3-
The preset month appears.
Press to increment the month.
Press to decrement the month.
Press
to confirm and set
the current day.
Press
to confirm and set
the clock.
5-
The preset time appears.
Press
to increment the time.
Press
to decrement the time.
Move the program slider to any other
position to confirm/finish this setting.
01 =
January ;
02 =
February ;
03 =
March ;
04 =
April ;
05 =
May ;
06 =
June ;
07 =
July ;
08 =
August ;
09 =
September ;
10 =
October ;
11 =
November ;
12 =
December
SET DATE AND CLOCK
1-
Move the Programming slider to
position
.
Preset year is solid.
2-
To select the current year, press , to
increment the year.
Press
, to decrement the year.
Press
to confirm and set
the current month.
To set the holiday function:
REVIEW
HOLIDAY
Holiday:
Holiday mode allows to switch off
the heating (or Z1) and hot water (or Z2) for a
specified number of days, adjustable between 1
and 99 days.
constant
all day
auto
off
constant
all day
auto
off
3-
Then press
to confirm. the
heating (or Z1) and hot water (or Z2)
switch Off and the number of remai
-
ning days will count down on display.
4-
To cancel the holiday function, press
button.
Press
button to start the programming
review.
Press again to go back on normal operating
mode.
Review:
Review mode allows to review all
programming in one time. The review starts
from the beginning of the week and each
steps appears each 2 seconds.
1-
Press Day button for
5 seconds
.
2-
OFF appears on the display. Press
or to increment or decrement the
number of days.
5 sec.
FACTORY SETTINGS
All LCD display will be turned ON for 2 seconds and the factory settings will be res
-
tored.
Note: To restore factory settings, press and hold down this part for more than
3
seconds
using the tip of a pen.
constant
all day
auto
off
constant
all day
auto
off
3 sec.
