
PRG7
7 DAY TWO CHANNEL DIGITAL
PROGRAMMER
Pack contains ............................................................................................1
Installation
................................................................................................1
Mounting of wall mouting plate ..............................................................................................
1
Wiring ......................................................................................................................................
1
Mounting of the Programmer .................................................................................................
2
Installer settings
........................................................................................3
Advanced installer setting .......................................................................................................
3
Technical specifications
.............................................................................4
PRG7 NEO ENG CP V08 15 04 2021
1
INSTALLATION
INSTRUCTIONS
PRG7a
x2
Screw Anchor
x2
Screws
The digital programmer is fixed on the wall with the wall plate which is supplied with
the product.
MOUNTING OF WALL MOUTING PLATE
PACK CONTAINS
INSTALLATION
x1
Standard wall plate
x1
Programmer
WIRING
All wiring must be in accordance with IEE regulations. This product is for fixed wiring
only.
All electrical installation work should be carried out by a suitably qualified
Electrician or other competent person. If you are not sure how to install
this programmer consult either with a qualified electrician or heating En
-
gineer. Do not remove or refit the appliance onto the backplate without
the mains supply to the system being isolated.
2-
Remove the wall plate from the
programmer.
1-
Unscrew the 2 screws under the
programmer.
3-
Secure the wall plate with the two
screws provided using the horizontal
and vertical holes.
4-
In case of surface mounting, a knock
out area is provided on the wall plate
and on the corresponding area of the
programmer.
x2
TABLE OF CONTENTS