Neolt Power Trim Plus 105, Руководство пользователя

Страница: 19 / 42

INSTALLATION
Power trim plus
4-3
NEOLT
Assembly 4.3
•
Open the packaging box
1
which contains all parts (Fig. 4.1 Transportation conditions ) .
•
Remove the polyester protections
2
(Fig. 4.1 Transportation conditions )
&
This operation must be carried out by minimum two people.
•
Screw on the lower cross-bar
3
first to one shoulder, then to the other with the supplied
screws and nuts
5
to assemble the support.
&
Attention the shoulder has holes of different diameter, the side with the bigger holes must
face outwards.
•
Screw on the upper cross bar
4
to the shoulders following the procedure of the lower cross
bar, using the supplied screws and nuts
5
.
&
Attention when you position the upper cross bar, make sure the central pin is facing upward
6
. The calibration set by
Neolt
is equal to 3 mm.
4
3
5
6