Neol ePowerSwitch M8 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 27

Neol ePowerSwitch M8 Скачать руководство пользователя страница 16

Quick Start Guide ePowerSwitch 8 M/S (M8 / S8) V.11/2006 Page

16

DEVICE PARAMETERS SETTINGS

Command /DP

With the commands in this menu, you can:

specify an e-mail address for problem reports: if a slave device without power is accessed by
a user, the mail client will pop up with that address in the To field. The user can then send
this message manually to the administrator.

activate and deactivate an ePowerSwitch slave connected to an ePowerSwitch master.

define the control mode (Single or Twin) for each ePowerSwitch device.
In

Single mode

, you can control each power socket individually.

In

Twin mode

, you can control two power sockets with one command. This mode is intended

mainly for restarting devices with redundant power supplies. Here, the four sockets fed by
power supply A (sockets 1 to 4) are automatically linked with the four sockets fed by power
supply B (sockets 5 to 8).

DEVICE PARAMETERS SETTINGS

1. Mail to
2. Device #1 Activated Twin Mode
3. Device #2 Activated Twin Mode
4. Device #3 Not Activated Single Mode
5. Device #4 Not Activated Single Mode
6. Device #5 Not Activated Single Mode

Enter Selection or <ESC> to exit

>

Command 1

MAIL TO SETTING

Mail to is:

Enter Name (max. 32 characters) or <ESC> to exit

>

DEVICE 1 PARAMETERS SETTINGS

Device #1 Activated Twin Mode

1. Single Mode / Twin Mode
2. Activate / Deactivate

Enter Selection or <ESC> to exit

>

Command 1

DEVICE 1 PARAMETERS SETTINGS

Mode is: Twin Mode

1. Twin Mode
2. Single Mode

Enter Selection or <ESC> to exit

>

DEVICE 1 PARAMETERS SETTINGS

Device is: Activated

1. Activate
2. Deactivate

Enter Selection or <ESC> to exit

>

«
...
14
15
16
17
18
...
»

Содержание ePowerSwitch M8




























Отзывы:

Нет отзывов