NeoGate TE200 Administrator Guide
www.yeastar.com Page 24
·
Signaling
PRI,MFC/R2,SS7
.Linecoding
HDB3, AMI, B8ZS
·
Codec
Default: A-Law, U-Law.
·
Echo Cancellation
This disables or enables echo cancellation, it is recommended not to turn this off.
.Framing
CRC Verification.
2) PRI Basic Option
·
Switch Type
national: National ISDN type2 (common in the US)
ni1: National ISDN type 1
dms100: Nortel DMS100
4ess: AT&T 4ESS
5ess: Lucent 5ESS
euroisdn: EuroISDN
qsig: Minimalistic protocol to build a "network" with two or more PBX of different
vendors!
.Switch Side
User, Network
3) PRI Advanced Option
.Enable Facility
To enable transmission of facility-based ISDN supplementary services (such as caller
name from CPE over facility).
·
Over Lap Dial
Define whether TE200 can dial this switch using overlap digits. If you need Direct Dial-in
(DDI; in German "Durchwahl") you should change this to yes, then TE200 will wait after
the last digit it receives.
·
Reset interval
Set the time in seconds between restart of unused channels. Some PBXs don't like
channel restarts. so set the interval to a very long interval e.g. 100000000 or "never" to
disable entirely. If you are in Israel, the following is important: As Bezeq in Israel doesn't
