NeoGate TE200 Administrator Guide
www.yeastar.com Page 14
Step1: Select
Static IP Address
as the WAN Connection Type.
Step2: Enter the IP Address.
Step3: Enter the Subnet Mask.
Step4: Enter the Gateway Address.
Step5: Enter the Primary DNS and Secondary DNS.
Step6: Click the
Save
button to save the settings.
Step7: Reboot the device.
Step8: Check the WAN‟s Status (Status
Network Status).
·
PPPoE
If your DSL provider says that you are connecting through PPPoE or if you
Normally enter a user name and password to access the Internet, perform these
Steps:
Step1: Select
PPPoE
as the WAN Connection Type.
Step2: Enter the User Name.
Step3: Enter the Password.
Step4: Click the
Save
button to save the settings.
Step5: Reboot the device.
Step6: Check the WAN‟s Status (Status
Network Status)
5.1.3 DDNS settings
DDNS (Dynamic DNS) is a method / protocol / network service that provides the
capability for a networked device, such as a router or computer system using the
Internet Protocol Suite, to notify a Domain Name System (DNS) name server to change,
in real time, the active DNS configuration of its configured hostnames, addresses or
other information.
Figure 5-3
5.1.4 Static Route
TE200 will have more than one internet connection in some situations but it has only one
default gateway. You will need to set some Static Route for TE200 to force it to go out
