18
Feed-box Information Setting
Function: Adjust the feed rate of needle.
1) Feed rate: It's the distance between two adjacent holes' centers on tape. You can change the needle feeding
rate by change this value
2) Feed speed: Adjust speed by changing its value against different components. Default value is 1.
3) Feed test: After finishing above steps, user can click this item to test component feeding location.
Tray Feeder Information
Function: Use to set the component’s info from tray and tube package. Complete picking up operation under
special feeders by changing the values.
1)
Rows:
Component qty in each row (X-direction).
2)
Columns:
Component qty in each column (Y-direction).
3)
Right top X/Y:
Find the position of right top component by align. Generally it is the last component in IC
tray, and left bottom side is the first component in IC tray.
4)
Start X/Y:
This is used to define the position of 1
st
component, its default setting is X1, Y1 (that is to say 1
st
row, 1
st
column ). If some IC on the tray has been used, you can directly setting the start X/Y as actual
