NEO STEAM F700, Руководство пользователя

Страница: 8 / 31

P. 8
Neo Steam F700 -
English version
6. SET UP
1. Open the shipping carton and carefully remove
the unit from the shipping carton;
2. Be sure to remove packing material from
around the faze machine, especially near the
nozzle;
3. Set the faze machine on a dry, flat surface;
4. Place the feeder tube with filter deep inside the
full fluid tank (Figure 1-D). Use definitely water
based liquid of good quality;
5. Plug mains power cord from the faze machine
into appropriate power supply socket. Wait
about 75 seconds for heating element to heat up;
6. Use LED display for operating control, or con -
nect DMX controller for setting, or firmly attach
the remote control mechanism to socket (Fig -
ure1-K) on the rear of the unit;
7. Refer to your controller manual for operation
details. (Appendix A).