MENU
3.4 AUTO PLAY MODE
3.7 PERSONALITY
AUTO PLAY MODE
Select the target
Auto
program .
Programs
AUTO 01
to
AUTO 10
are fully pre-programmed and will not be
altered by changes in
EDIT CUSTOM
mode. The auto speed can be set from
SP 1~255 .
Programs
CUSTOM 01
to
CUSTOM10
are fully pre-programmed and can
be edited in
EDIT CUSTOM
mode.
3.5 DMX ADDRESS
DMX ADDRESS
Enter the
DMX ADDRESS
mode to set the DMX ADDRESS.
RUN MODE
Enter the
RUN MODE
mode to set working mode.
DMX
mode is for using the DMX512 controller to control the fixtures.
SLAVE
mode is for Master -- Slave operation, or controlled fixture by
Pix-controller.
Note:
When fixtures are under Auto program operation, the
RUN MODE
does
no works.
3.6
RUN MODE
PERSONALITY
Enter the
PERSONALITY
mode to select DMX mode:
,
,
,
,
,
,
,
or
.
3.8 ID ADDRESS
3.9 SPECIAL SETTINGS
SETTINGS
UPLOAD
PASSWORD
RESET
PASSWORD
ID ONOFF
OFF
ON
****
SEND...
END
****
RESET...
DIMMER
DIM1
OFF
DIM3
DIM2
DIM4
COLOR
RGB TO W
OFF
UC
MENU
ID ADDRESS
Enter the
ID ADDRESS
mode to set the ID ADDRESS.
SETTING
Enter
ID
in order to allow/disallow ID address function from the DMX512
controller.
Select
UPLD
to upload the custom programs from the current MASTER unit to
the SLAVE units.
In order to activate the upload function the password must be entered.
Password is the same as the main access password.
When uploading the MASTER and SLAVE units will display YELLOW.
If an error occurs when uploading the MASTER and/or SLAVE units will display RED.
On successful uploading of the custom programs the MASTER and SLAVE units
will display GREEN.
In order to reset custom modes to default values select
REST
.
Enter
Dim
to select dimmer mode and dimmer speed. When DIMMER is
set to
Off
, then RGBW and MASTER DIMMER are linear. The Dim 1/2/3/4
are speed modes of the non linear dimmer ,
Dim1
is the faster, while
Dim4
is the slowest.
The factory default setting is
Dim4 .
COLOR
is for activate/unactivate the color calibration functions.
When
RGBW
is selected, on RGB = 255,255,255, the color is displayed as
calibrated in CAL2 -- RGBW. When
COLOR
is set
OFF
, on RGB = 255,255,
255, the RGB values are not adjusted and the output is most powerful.
When [
UC
] is selected, the RGB output are adjusted to a standard preset universal color
which balances fixtures from different generations..
ADDERSS
1~512
MENU
RUN
SLAVE
DMX
MENU
PERSON
TOUR
BLOCK1
BLOCK2
ARC 1
ARC 1+D
ARC 2
ARC 2+D
ARC 2+S
HSV
MENU
ID
1~66
MENU
AUTO
AUTO 01
AUTO 10
CUSTOM 01
CUSTOM 02
CUSTOM 03
CUSTOM 04
CUSTOM 05
CUSTOM 06
CUSTOM 07
CUSTOM 08
CUSTOM 09
CUSTOM 10
SP
0~255
