Page
40
of
76
4.5.7 Transient, Event and Disturbance Recorder
4.5.7.1 Event Definition
Navigation: “Events” – “Definition”
There are different types available. The following table gives an overview about event type and
recording type
Type
Recording
EN50160
Event list of all EN50160 limit violations
Alarms
Event list of defined alarms
Harmonic Voltages
Event list of harmonic voltage limit
violations
Transients
Raw Data Record with full sampling
rate
at limit violation
Signalling Voltage
Record of binary signal of Signalling
Voltage
Disturbances
½ Period record and Raw Data record
at limit violation
The
Events definition panel
allows to define various trigger conditions.
The main screen of this panel displays a list of different event types
Event types can be activated on the left (2) and configuring on the right. (3)
All changes in the main panel and its sub-panels must be confirmed by Apply button. (5)
2
1
4
3
5
1.
List of available event types
2.
Event enable/disable button
3.
Event configuration button
4.
System selection (actual
system or all systems)
5.
Apply and Revert buttons
EN50160 Events
Voltage events according EN50160 can only be enabled/disabled and not configured, the
configuration of EN50160 events is possible in the EN50160 setup panel.
Navigation Menu
Setup
EN50160
Events
Содержание PQA8000
Страница 32: ...Page 32 of 76...