NEO FLEX TRUSS
P. 9
ENGLISH VERSION
6. MASTER/SLAVE
OPERATION (via DMX cable)
When multiple
NEOFLEX TRUSS
units are used together,
Master/Slave mode
enables the assignment of one master
unit and multiple slave units. The master unit can be oper-
ated in stand-alone mode or by IR6 infrared remote control.
The slave units should all be set to slave mode as described
below.
- Note: Slave units should be configured and connected
before linking to master unit.
SETUP AS BELOW:
Slave units:
1.
Press
MENU
button until
3-CH or 8-CH
is displayed
2.
Press
ENTER
3.
Set
DMX
address to d 1
4.
Connect DMX cable from master unit to DMX In con-
nector Link following slave units in similar cable configuration.
Master unit:
1.
Set to
Auto or control with IR6 infrared remote.
2.
Link to slave units, beginning from the master DMX
Out connector.
BATTERY/BATTERY LIFE DISPLAY
- Rechargeable lithium battery.
- Up to 20 hours of use per charge (sing single colors)
- Aprox. 5 hours charge time
-
iTRI RED
indicator = Charging
- iTRI GREEN
indicator = Fully Charged
IMPORTANT
: Put the
iTRI ON/OFF
switch in the OFF po-
sition when recharging
IMPORTANT
: Charge the
iTRI
for 24 hours continuously
before first use.
