NEO FLEX TRUSS
P. 8
ENGLISH VERSION
The IR6 infrared controller enables remote control of
the NEO FLEX TRUSS. To pair the IR6 to the NEO FLEX
TRUSS, follow these steps:
1. Press
MENU
button until SEr is displayed
2. Press
ENTER
3. Press
UP
or
DOWN
to turn infrared operation
ON or
OFF
4.
Press
ENTER
Ir6 button functions
•
AUTO:
Run auto programs
•
FADE :
Fade auto programs
•
SPEED:
Enable speed adjustment of auto programs
•
+/ -:
Increase / decrease speed of auto programs
•
SOUND :
Activate sound-active mode
•
SENSITIVITY:
Enable sound sensitivity adjustment
•
+/ -:
Increase / decrease sound sensitivity
•
MANUAL :
Enable static color selection
•
0-9:
Select static colors
•
R:
Select red
•
G:
Select green
•
B:
Select blue
•
A :
Select ambar
•
+/ -:
Increase / decrease output of each color
•
% :
Enable adjustment of total light output level
•
+/ -:
Increase / decrease total light output
•
STROBE:
Enable adjustment of strobe rate
•
+/ - :
Increase / decrease strobe rate
•
STROBE:
Press again to turn o strobe
•
BLACKOUT:
Turn o all light output
•
BLACKOUT:
Press again to exit blackout mode
5. INFRARED (IR6) REMOTE CONTROL OPERATION
