NEO ION 132 F, Руководство пользователя

Страница: 11 / 30

P. 11
- Neo ION 132 F English version
Fan
Auto Speed /High
Speed
Fans mode
Hibe OFF, 01M~99M, 15M Sleeping mode
Back 02~60m 02m Show backlight time
Flip ON/OFF Display 180°reverse
User Use1/Use2 Users mode
Cali
Code XXX Password: 050
CHxx XXX Calibrate channel value
Ver X1.0.0 IC Version
load ON/OFF Reload Default
5. DMX CONNECTION AND DMX PROTOCOL
The device is controlled by universal DMX 512 pro-
tocol, DMX address is the start channel used to re-
ceive instructions from the external controller. For
independent control, each fixture must be assigned
its unique address control channels. For example,
this device has four channel modes: 10/13, if we set
the mode at standard 13 channels mode, and there
are several models need to be independently con-
trolled, we just simply address first fixture at 1, and
second fixture at 11, third one at 21, etc.
If the devices have the same address, they will be-
have synchronically.
DMX addressing is limited, don’t set the address so
high that without enough control channels for the
fixtures. Display is flashing when no DMX signal is
received.
This device is equipped with 3-pins DMX in and
out sockets only. Pin 1 = GND | Pin 2 = Signal (-) |
Pin 3 = Signal (+)
The termination is prepared by soldering a 120Ω
resistor between pins 2 and 3.
DMX addressing