NEO FOLLOWER 35ST, Руководство пользователя

Страница: 7 / 17

P. 7
- Neo Follower 35ST
1. Unscrew the screws on the bottom of the hous-
ing, holding the plate where the lamp is under-
neath. Carefully remove the metal plate.
2. Insert the lamp counter-clockwise 35 degree
into the lamp holder, then turn clockwise 35
degree to put it into the right position. Atten -
tion: please wrap the lamp with the soft cloth
that comes with the packing, avoid naked hand
contact to the lamp directly.
3. Put the lamp holder back position after install
the lamp, tighten the screw and complete the
installation. Please remember the lamp is not
a hot-restrike type, you must wait for approx-
imately 10 minutes after having turned off the
lamp before you can turn it back on again.
Layout Drawings
Instructions
Dimming/color temperature adjustment instruction:
• Dimming: Linear dimming-Intensity 0% to
100%. Instruction: dimming according to silk -
screen instruction by slider.
• Color temperature: Linear adjustment from 0%
to 100%.
• Instruction: Adjust color temperature according
to silkscreen instruction by slider.
• Iris: Adjust Min. to Max linearly. Instruction:
adjust iris according to silkscreen instruction
by slider.
• Frost: Soften the edge of spot Instruction:
push the adjusting lever, please adjust the frost
effect according to the fixed position of the silk-
screen.
Do not operate this device with open cover.
CAUTION!
210
1004.9
1049.9
254.4
335
442.8
English version