NEO 94-001, Инструкция по эксплуатации

Страница: 18 / 84

18
www.neo-tools.com
AUTO Autorange
MAITENANCE
To continue protection against fire, replace fuse only with the specified voltage and current ratings : F 250
mA L 250V, fast action. To clean the meter, use a damp cloth and mild detergent only, do not use abrasives or
solvents on it.
GENERAL DESCRIPTION
This digital multimeter is compact 3½ digits digital multimeter for measuring DC and AC voltage, DC and
AC current, resistance, temperature, diode, transistor, continuity, capacitance. It has the functions of polarity
indication, data hold, maximum value hold, overrange indication and automatic power-off. It can be operated
easily and is an ideal instrument tool.
INSTRUCTION
Display 3½ digit LCD, with a max. reading of 1999 1.
„ 2.
RANGE
” Button. The meter defaults to the autorange mode when you measure the voltage, current or
resistance. When the meter is in the autorange mode, „ AUTO ” is displayed. To enter and exit the manual
range mode:
Press „ a. RANGE ” button
The meter enters the manual range mode and the symbol „ AUTO ” turns off. Each press of the „ RANGE ”
button increments the range.
When the highest range is reached, the meter wraps to the lowest range.
To exit the manual range mode, press and hold down the „ b.
RANGE
” button for 2 seconds, the meter returns
to the autorange mode and the symbol „ AUTO ” is displayed again.
„FUNC.” 3. Button
When you measure the current, pressing this button will switch the meter between DC function and AC
function.
When you measure the temperature, pressing this button will switch the meter between * mode and *
mode.
When you measure the diode or the continuity, pressing this button will switch the meter between the
diode and the continuity functions.
Power 4. Switch
It can be used to turn on/off the meter.
Function/Range 5. Switch
This switch can be used to select desired function and range.
„10A” 6.
Jack
Plug-in connector for the red test lead for current ( 200mA~10A )
measurements.
„COM” 7. Jack
Plug-in connector for black (negative) test lead.
„INPUT” 8.
Jack
Plug-in connector for the red test lead for all measurements except current (≥ 200mA ) measurements.