EN
TRANSLATION OF THE ORIGINAL INSTRUCTION
FAN HEATERS
90-065 / 90-066
NOTE: BEFORE THE EQUIPMENT IS USED FOR THE FIRST TIME, READ THIS INSTRUCTION MANUAL AND KEEP IT FOR FUTURE
REFERENCE. PEOPLE WHO HAVE NOT READ THIS INSTRUCTION SHOULD NOT ASSEMBLE, LIGHT, ADJUST OR OPERATE THE UNIT
DETAILED SAFETY REGULATIONS
ATTENTION!
Read carefully-The infrared heater is designed for safe operation. Nevertheless, installation, maintenance and operation of the heater can be
dangerous. Observing the following procedures will reduce the risk of fire, electric shock, injury to person and keep installation time to
a minimums.
1.1 This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental c apabilities or
lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand
the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without
supervision.
1.2
WARNING: In order to avoid overheating, do not cover the heater.
1.3 Children of less than 3 years should be kept away unless continuously supervised.
1.4 Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its
intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and
understand the hazards involved.Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform
user maintenance.
1.5 CAUTION-some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable
people are present.
2. Introduction
2.1 Depending on the power cord type this fan heater may be used only in household, warehouses and workshops, building sites or greenhouses
depending. It incorporates a thermostat and a self-resetting thermal cut-out to control the heating elements. The thermostat feels the air
temperature and controls the surrounding temperature. The fan motor is not controlled by thermostat and it keeps on working when the thermostat
cuts off the heating element. The self-resetting thermal cut-out will switch off the heater to ensure the safety when overheating.
2.2 When using the heater for the first time, you may notice a slight emission of smoke. This is quite normal and it stops after a short time. The
heating element is made of stainless steel and was coated with protection oil by production. The smoke is caused by the left oil when heated .
3. Technical specifications
Model
90-065
90-066
Voltage
220-240V~
220-240V~
required power
2000W
3000W
current
8.3-9.1A
12.5-13.6A
Required Fuse
10A
15A
Setting
30/2000W
30/1500/3000W
Self-resetting Thermostat
55°C
55°C
Product meas (mm)
210*195*275
210*195*275
N.W.(KG)
2.9
3.2
3.1
Housing of steel plate and coated by heat-resistant powder.
3.2
Supplied complete with cord and plug.
4. Description of Control Panel
90-065
90-066
4.1 Left Knob: Thermostat dial
4.2 Right Knob: selector with heat setting
5. Special safety regulations
5.1 Before use, please check the marking on the power cord. Depending on the power cord type this appliance may be used in different ambient
conditions
Type
You can use the appliance in
Do not use in
H07RN-F
household, warehouses and workshops, building sites or greenhouses
H05RN-F
household, warehouses and workshops or greenhouses
building sites
H05RR-F
household, warehouses and workshops
building sites or greenhouses
5.2
When using electrical appliance basic precautions should always be followed including below:
5.2.1
The fan heater is not suitable for use outdoors in damp weather, in bathrooms or in other wet or damp environments.
