NEO TOOLS 19-903, Инструкция по эксплуатации

Страница: 10 / 44

10
neo-tools.com
Fill the microtorch only with butane gas. 7.
Protect the microtorch against oil, acids and other chemical agents. 8.
When operating the microtorch always use personal protection 9.
measures: protective glasses and gloves.
Do not use the microtorch continuously for more than 30 10.
minutes.
Do not use damaged microtorch. 11.
Do not repair the microtorch by yourself, do not dismantle parts 12.
of the microtorch.
Use the microtorch accordingly to the manual. 13.
WARninG!
Do not use soldering joints for elements that may be subject to
•
temperature above 130°C.
Do not join parts used for lifting weights with solder joints.
•
Do not solder live electrical installations or circuits that require
•
ESD protection.
cAUTiOn!
Valve for gas refilling cannot be damaged.
cAUTiOn!
All checks and repairs should be carried out by the supplier’s service
department or by service site certified by the supplier. Make all
checks and repairs only after the microtorch is gas emptied.
cAUTiOn!
It is recommended to carry out few soldering tests on waste pieces of
soldered material. Soldering skills come with practice.
inTEndEd UsE
Microtorch design is compact, it fits in hand and allows working in
places unavailable for large gas torches. Gas supply allows working
in places, where no other energy source is available. The soldering
function is especially useful for joining parts like automotive
electrical installations, low-voltage electrical installations in buildings
and other works that require higher temperatures.