ELC 250WATT MINI NEO-ONE
Neo-Neon International
©
Neo Neon LTD, GuangDong china
All rights reserved. No part of this manual may be reproduced, in any form,
Without the express permission, in writing from Neo – Neon LTD GUANGDONG,
China
Printed in China 2006
3
•
Do not expose the fixture to rain or moisture.
•
Refer all service to a
Neo-Neon
service technician.
To protect yourself and others from UV radiation
and lamp
Explosion
.
•
Never operate the fixture with missing or damaged lenses and/or covers.
•
When replacing the lamp, allow the fixture to cool for at least 5 minutes
before opening the fixture or removing the lamp. Protect your hands and
eyes with gloves and safety glasses.
•
Do not stare directly into the light. Never look at an exposed lamp while
it is lit.
•
Replace the lamp if it becomes defective or worn out.
To protect yourself and others from burns and fire
•
Never attempt to bypass the thermostatic switch or fuses. Always
replace defective fuses with ones of the specified type and rating.
•
Keep all combustible materials (for example fabric, wood, paper)
at least 0.3 meters (12 inches) away from the fixture. Keep
flammable materials well away from the fixture.
•
Do not illuminate surfaces within 0.3 meters (12 inches) of the
fixture.
•
Provide a minimum clearance of 0.1 meters (4 inches) around fans
and air vents.
•
Never place filters or other materials over the lens.
•
The exterior of the fixture can reach temperatures up to 60° C
(140° F). Allow the fixture to cool before handling.
•
Do not modify the fixture or install other than genuine
Neo-Neon
parts.
•
Do not operate the fixture if the ambient temperature (Ta) exceeds
40° C (104° F).
To protect yourself and others from injury due to
falls
•
When suspending the fixture above ground level, verify that the
structure can hold at least 10 times the weight of all installed
devices.
•
Verify that all external covers and rigging hardware are securely
fastened and use an approved means of secondary attachment such
as a safety cable.
