Seite
10
von
58
2) Connect the power adaptor to TWP-1000 device and press the power button
to turn on TWP-1000 device.
It will show the default standby screen as below on projector when
system is ready.
3) Attach the speaker cable to TWP-1000 phone jack for audio output
4) Attach the USB mouse and keyboard to TWP-1000 front USB port for OSD
control and remote desktop control
5) Attach the USB IWB cable to TWP-1000 rear USB port for IWB control
7.TWP-1000 Receiver Device
1) Connect WIPS TWP-1000 device to Projector through VGA port and turn on
projector power.
2) It will show the Quick Guide Information, WiFi Network Name, IP Address
and Code on standby screen.