Neo Car Audio BNIC3V9, Руководство пользователя

Страница: 4 / 10

2.3 Preparation and adapter installation
1. Turn off car engine and remove key from ignition.
2. If your radio uses a Security Code, make sure that you have the code before
unplugging the radio.
3. Un-mount your radio from the dash in order to get access to the back side of the
radio. Some vehicles require special tools to remove the radio. Please consult your
vehicle’s dealership or a local car audio professional if necessary.
4. Attach the car harness connector to the back of the stereo to the CD changer port.
Be sure to make a firm connection but do not force it. Connect the other end to the
module.
Installation into Nissan and Infiniti
Picture 1: NIS2 vehicle specific harness
(5) – red power wire may also be yellow
Installation
A. Locate the vehicle specific cable (NIS2) and blue colored Posi-Tap clip that came
with your adapter (picture 1)
B. Connect NIS2 harness to the port at the back of the radio (see picture 2). Use the
connector (3) on the picture 1.
Note : If the port is occupied with a different factory harness – disconnect this harness;
insert connector (3) to the slot at the back of the stereo, reconnect the disconnected
factory harness back to the stereo using the female end of the NIS2 harness (4).
If the port on the back of the stereo is empty – let the female end of the NIS2 harness (4)
hang free – do not connect it to anything.