Neo Car Audio BNIC3V9, Руководство пользователя

Страница: 3 / 10

1.5 Completeness and connection of set
a) NEO Bluetooth adapter set consists of the following (see figure 1).
b) Basic wiring diagram of NEO Bluetooth adapter (see Figure 2):
1.6 Important Compatibility Notes
If your vehicle is equipped with an external factory CD changer, you must disconnect it
in order to be able to install the interface. You will lose the use of the external CD
changer to gain the use of your Bluetooth adapter. Any built-in CD changer will remain
working.
Chapter 2 – General Installation
2.1 Installation location:
Most installations will require you to remove the factory radio in order to plug in the
vehicle specific harness.
For some vehicles, you will also have the option to connect the interface to the factory
pre-run CD changer cable located in the trunk or glove box.
2.2 Tools needed:
In many cases, there are no special tools required in order to remove the stereo. Radio
removal tools are available for some stereos to aide in the removal of the radio. Please
consult your local car audio shop or your vehicle’s dealership for instructions or
assistance if necessary.
If you are unsure how to install the interface properly, we recommend contacting your
local car stereo shop for the assistance.