background image

 

Page | 3 

 

P: 419.542.7751    F: 419.5426690   800.782.761   nemcofoodequip.com 

 

 

Important Safety Instructions 

When using electrical appliances, basic safety precautions 
should be followed, including the following: 
Warning – To reduce the risk of burns, electric shock, fire, 
injury to persons, or exposure to excessive 
electromagnetic energy: 
1) Read all instructions before using the appliance. 
2) Read and follow the specific “PRECAUTIONS TO AVOID 
POSSIBLE ELECTRIC SHOCK” found on page X. 
3) This appliance must be grounded.  Connect only to 
properly grounded outlet.  See “GROUNDING 
INSTRUCTIONS” found on page X. 
4) Use this appliance only on the specified electrical circuit. 
5) Install or locate this appliance only in accordance with 
the provided installation instructions. 
6)  Do not heat any sealed cans on the induction range.  A 
Sealed can may explode. 
7) Use this appliance only for its intended use as described 
in the manual.  Do not use corrosive chemicals or vapors 
on this appliance. 
8) As with any appliance, close supervision is necessary 
when used by or around children. 
9) Do not operate this appliance if it has a damaged cord 
or plug, broken or cracked glass surface, if it is not working 
properly, or if it has been damaged or dropped. 
 

 

 

 

 

 

 

 

 

 

 

 

10) This appliance should be serviced only by qualified 
service personnel.  Contact Nemco for the authorized 
service facility for examination, repair or adjustment. 
11)   Do not cover or block any openings on the appliance. 
Allow 4” clearance from all vent openings. 
12) Do not place the range in, on or near open flames, 
electric burners, ovens or other high temperature 
surroundings. 
13) Do not move the range while cooking or while hot. 
14) Do not store this appliance outdoors. Do not use this 
product near water – for example, near a kitchen sink, in a 
wet basement, near a swimming pool, or similar locations. 
15) Do not immerse cord or plug in water. 
16)  Keep cord away from heated surfaces. 
17) Do not let cord hang over edge of table or counter. 
18) When cleaning, use only mild, nonabrasive soaps or 
detergents applied with a sponge of soft cloth. 
19) Do not clean with metal scouring pads.  These will 
scratch and damage the glass and control surfaces. 
20) Do not touch the hot surface of the glass cooktop. 
21) Do not heat empty pots/pans. Using an empty pan can  
result in extremely high temperatures that may damage 
the pan and the range. 
22) Keep pacemakers at least 2 feet from the cooktop. 
 

 

 

 

 

 

 

 

 

 

 

SAVE THESE INSTRUCTIONS 

Содержание 9130













Отзывы: