Version: 5.0
05.07.2017
4
EN
MONTAGE
Tools needed
50mm
ø 10mm
Step 1:
Drill the 6 holes in the wall
Fig. 01
and push
the
dowel 10x50 (H)
into the holes
Fig. 02
.
Fig. 02
Fig. 01
IMPORTANT
1. Tighten the screws, but not too tight.
Over-tightening can damage the screw,
which greatly impairs their holding power.
2. Make sure that the mounting screws are
anchored into the center of the anchor
safely.
The use of an edge locator is highly
recommended.
