A u t h o r :
J . L e v i n e
D a t e :
J a n 1 3 , 2 0 1 4
P a g e
|
5 - 7
A p p r o v e d :
R . H a n s o n
D a t e :
J a n 1 3 , 2 0 1 4
R e v i s i o n :
A - 0 1
TENON/POLE MOUNT:
1.
Inspect package contents to ensure no damage has occurred during shipping.
2.
Remove ZLM module and yoke assembly from box.
3.
Feed cable through supplied strain relief or approved alternative. Torque to spec.
4.
Feed cable through pole. Mount yoke to pole using (3) three supplied M6 cap screws.
5.
Attach ZLM module to mounting yoke using Central Mounting Plate, M6 lock washers, M6
washers and M6 socket head cap screws (provided) as shown.
6.
Aim fixture and tighten mounting brackets to 6.8 N.m (60 in.lb) torque.
7.
Make electrical connections according to page 3.
