Remove the old plate
from the backer plate by
removing three screws.
R55
VT
/
R55i
VT End of Pivot Sprinkler
Plate Replacement Kit
R55VT-PLATE KIT 3/19
848 Airport Road, Walla Walla, Washington 99362 U.S.A. / Tel: +1 509.525.7660 / Fax: +1 509.525.7907 /nelsonirrigation.com
Nelson Irrigation Corporation / 848 Airport Road, Walla Walla, Washington 99362 U.S.A.
Tel: +1 509.525.7660 / Fax: +1 509.525.7907 / [email protected] / nelsonirrigation.com
REPLACEMENT INSTRUCTIONS
Plate
Retaining Ring
Screws
Insert plate/motor
assembly into body.
Remove retaining ring
using snap-ring pliers.
Separate plate/motor
assembly from body.
Install new plate by aligning
all three holes in the backer
plate with the holes in the
plate and inserting three
screws.
Remove
nozzle
from
body.
WARRANTY AND DISCLAIMER:
Nelson R55VT & R55i VT End of Pivot Sprinklers are warranted for one year from the date of original sale to be free of defective material and
workmanship when used within the working specifications for which the products were designed and under normal use and service. The manufacturer assumes no responsibility
for installation, removal or unauthorized repair of defective parts and the manufacturer will not be liable for any crop or other consequential damages resulting from any defects
or breach of warranty. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING the warranties of merchantability AND
FITNESS FOR PARTICULAR PURPOSES AND OF ALL OTHER OBLIGATIONS OR LIABILITIES OF MANUFACTURER. No agent, employee or representative of the manufacturer
has authority to waive, alter or add to the provisions of this warranty nor to make any representations or warranty not contained herein.
Secure plate/motor
assembly to body by
replacing the snap ring.
#13162 R55 VT Plate Replacement Kit
QTY
R55 Blue Plate
1
Retaining Ring
1
Screw – #4-24 X .30” LG
3
#13164 R55i VT Plate Replacement Kit
QTY
R55i VT Green Plate
1
Retaining Ring
1
Screw – #4-24 X .30” LG
3
NOTE: For R55 and R55i, use kits #12438 and
#12655, respectively.
A worn or damaged plate will result in decreased performance and should be replaced. The plates are
not interchangeable between R55VT and R55i VT models. To convert from one model to the other use
the corresponding plate/motor replacement kit.
Reinstall
the nozzle
in body.
1
2
3
4
5
6
7
8
