Nelson NW511, Руководство пользователя, Страница: 26 / 32

NW511
26
Filling up with regenerating salt
(for models with water softener)
Caution: use only water softening salt, do not use cooking salt.
Salt must be added when the LED underneath the symbol shown in the box on the left
lights up.
Top up with salt when there is no water in the tank to prevent washing water from getting
into the water softener device.
The salt tank has a capacity of about 1 kg of coarse ‐ grained salt .
The salt tank is in the bottom of the appliance's tank. After removing the basket, undo the
cap and pour the salt in using the funnel supplied. Remove any salt residues around the
opening before screwing the cap back on.
8 MAINTENANCE AND CLEANING
Although no particular scheduled maintenance is required, users are advised to have the warewasher
checked by a specialist technician twice a year.
The internal pipe of the detergent peristaltic pump should be checked and/or replaced by the After ‐
Sales Service every 12 months or 15,000 wash cycles and operation of the diaphragm rinse aid pump
should be checked.
N.B. the manufacturer accepts no liability for wilful damage or damage deriving from carelessness,
neglect, failure to comply with instructions, regulations and standards or incorrect connections, which
lead to forfeiture of warranty cover.
If possible, leave the door ajar when not in use;
Clean surfaces thoroughly and often with a damp cloth; use neutral, non ‐ abrasive detergents which do
not use chlorine compounds, which corrode and damage stainless steel.
Do not use the products mentioned above even when cleaning the floor underneath or in the vicinity of
the warewasher, to ensure that fumes or drops cannot damage the steel surfaces.
The warewasher has IPX4 protection but pointing water jets straight at it for cleaning is
forbidden