Section 6: Disassembly Guide
6-5
6.6
BATTERY REPLACEMENT
Removal
1.
Follow procedure in paragraphs 6.2 and 6.4.
2.
Remove the two screws from the battery bracket shown in Figure 6-4 and
lift the battery out of the bottom case.
3.
Use needle-nose pliers to disconnect the leads from the battery.
Figure 6-4: Battery Removal
4.
The lead-acid battery is recyclable. Do not dispose of the battery by placing
it in the regular trash. Dispose of properly according to state, local or other
applicable regulations, or contact Mallinckrodt Technical Services to return
for disposal.
Installation
5.
Connect the leads to the battery. The red wire connects to the positive
terminal and the black wire goes to the negative.
6.
Insert the new battery into the bottom case with the negative terminal
towards the bottom of the monitor. Install the bracket and grounding lead
with the two screws.
7.
Complete the procedure in paragraph 6.5.
