Page 7
B. Application for SYSTEM TRIS motors – 3 Motors for: window, blinds and rolling
shutter
♦
The actuator for the window is controlled directly by the channel selected with the
▲▼
buttons.
♦
To operate the motor of the internal blinds, the F1 function is used.
Press the F1 button; the steady-on F1 icon appears on the display. Pressing the
▲
(open)
▼
(close) buttons activates the command to the internal blinds.
To cancel the F1 function, press the F1 button again; the icon disappears from the
display.
♦
To operate the motor of the external rolling shutter, the F2 function is used.
Press the F2 button; the steady-on F2 icon appears on the display. Pressing the
▲
(open)
▼
(close) buttons activates the command to the external rolling shutter.
To cancel the F2 function, press the F2 button again; the icon disappears from the
display.
Once inside the menu of one of the two “memory groups” (M1 or M2), whenever
the F1 or F2 button is pressed, the respective steady-on icons appear on the
display (M1, M2, F1, F2). This means that the respective group of channels can
now be controlled.
WARNING:
For all the other “normal” applications – i.e., those not supported by the devices
described above - where the radio remote control is used, regardless of the channel
number on which it is set, if the steady-on F1 or F2 icon appears on the display,
NOTHING MOVES
when the
▲▼
buttons are pressed because these functions are not
associated with any type of command.
I
N THIS CASE
,
THE
F1
AND
F2
ICONS SHOULD NEVER APPEAR ON THE DISPLAY DURING USE
.
The simultaneous combination F1+F2, active on the display, is a special function regarding certain
machines which is described in the manual of the specific machine.
6. Battery status indication
The level of the battery charge is measured at each passage from the standby state to the wait
state. The level is shown on the display using the battery indicator:
Level above 2.6V:
3 bars lit
Level between 2.4V and 2.6V: 2 bars lit
Level between 2.2V and 2.4V: 1 bar lit
Level below 2.2V:
0 bars lit – all off
7. Environmental protection
All materials used in the manufacture of this appliance are recyclable.
We recommend that the device itself, and any accessories, packaging, etc. be sent to a centre
for ecological recycling as established from laws in force on recycling.
The device is mainly made from the following materials:
Iron
Aluminium
Cuprum
Zinc
Silicon
Plastic of various type
Dispose materials in conformity with local regulations about removal.
To disassemble device, after removing battery cover, unscrew 2 screws fixing shells.
