Neilsen CT4342, Оригинальное руководство пользователя

Страница: 6 / 17

5
2.3 Operating Mode
Time to switch from the hammer, hammer drill, drill function knob in shown in figure 3 ", "rotation has
received the required operating mode. (note: must select operation mode under the condition of the
engine stopped.)
Hammer Drill
Image 3
III Main use and feature
3.1Use
This machine is suitable for the concrete and bricks and rock hammer drill or chisel on homework.
3.2Feature
3.2.1 This product is lighter in weight, low emissions of gasoline engine type hammer/drill.
3.2.2This product conforms to the man-machine engineering design, the greatest degree reduces the
operator working strength, easy to operate, comfortable. Operator can achieve 360 - degree work.
3.2.3 Can adjust the impact energy and impact number, applicable to various bit less than 40 mm in
diameter.
3.2.4 Advantage: can save with heavy equipment, such as generator, air compressor, trucks.
IV Preparatory work before use
4.2Fuel
Use more than 90 # gasoline and special two-stroke engine oil
Recommend the proportions
Condition Gasoline
：
Engine oil
Run within 20 hours 20:1
Run after 20 hours 25:1
4.2.1 Banning the use of pure gasoline (without two-stroke engine oil) as a fuel.
4.2.2 Add fuel In a well ventilated place
4.2.3 Please do not too much oil in fuel tank, please do not over the neck of the fuel tank filler. If fuel
overflow, must remove the fuel or fuel volatilization completely restart the engine
4.2.4 Go after tighten the fuel tank lid.