Neilsen CT4342, Оригинальное руководство пользователя

Страница: 7 / 17

6
V Start
5.1
Before starting the new machine. Repeat the transparent cup is full oil fuel oil bubble (image 3),
makes the carburetor fill it up with fuel.
Image 4
5.2
Machine lie flat on the ground, one hand operation handle, another hand quickly pull starter
handle 50 centimeters. Please do not make the handle in the process of repeated pull rebound, hold
the handle, to prevent the rapid rebound in order to protect the starter
5.3
After starting the gasoline engine, completely open the throttle.
VI Run
6.1
Idle speed gasoline engine starting and running for 3 to 5 minutes, preheat machine.
6.2
When gasoline engine has been preheated, according to the impact energy required, put the
throttle control the press the right hand position. Note: in the first 24 hours, using the machine work
should give priority to with low speed, unavailability of maximum throttle; In order to prolong service
life.
6.3
Gasoline engine speed control in medium speed gears.
6.4
Prohibited in the non-work state operating the machine at a high speed.
VII Stop machine
Fuel bubble
Start handle
Choke(Close when
cold start)