Neilsen CT3994, Оригинальное руководство пользователя

Страница: 10 / 16

4.6 Changing the clamping jaw
The clamping jaws are wear parts. If you are un- able to rivet in a single working
stroke you should change the clamping jaws:
I.
(1) Front sleeve
II.
(2) C lamping sleeve
(3) Riveting mechanism
(4) C lamping jaws (3 parts)
Remove the front sleeve (1) and the clamping sleeve (2) from the device (3) and
remove the clamping jaws (4) from the clamping sleeve (2).
III.
O il the clamping sleeve (2) with D grease (5).
IV.
Hold the clamping sleeve (2) so that its forward part is faced down.
V.
Place the clamping jaws (4) in the clamping sleeve (2) with their smooth sides
facing outwards.
VI.
Mount the clamping sleeve (2) with the new clamping jaws (4) and finally
replace the front sleeve (1).