10
6. Gear Control Lever
●
There are two gear control levers on this machine, of which one is to control the gear of forward and
reverse and the other is to control the gear of rapid and low. See the diagram 27.
●
Explanation of Gear Marks: See the diagram 19.
1- Low Gear 2- Rapid Gear 0- Neutral Gear F- Forward Gear R- Reverse Gear
●
When connecting different attachments, maybe the handrail needs to be steered. Therefore there may be
differences. Please carefully read the explanation of marks. See the diagram 19.
●
Attention: The handle of clutch must be seized when varying gears during the working process! See the
diagram 23.
7. Governor
●
Governor mainly control the rotating speed of gasoline engine. See the diagram 28.
B
、
The Correct Way to Connect Attachments
1. Before connecting attachments, it should be the first to check that whether the ridge orientation is according
to the one of rotation. See the diagram 29.
Attention: If not, the creep force of rubber tires will be affected!
Gear control levers
Diagram
27
High speed
Low speed
Diagram
28
Governor
Diagram 29
Содержание CT3324
Страница 1: ...1 Specification of Multifunction Machine MF360 ...
Страница 2: ...2 B65 0JU U K ...